Finerfilters 3 Stage Drop-In Aquarium Reverse Osmosis Replacement Water Filters
Filter Specifications
10" Drop-In Sediment Pre-Filter
Removes impurities in water such as sand, dirt, rust, silt, and suspended solids down to 5 Micron in order to protect the RO membrane.
10" Drop-In CTO Activated Carbon Block Filter
Removes chlorine taste and odour as well as THMs and other organic chemical compounds. This CTO filter will not remove chloramines.
RO Membrane
The semi-permeable membrane removes impurities in the water down to 0.0001 Micron including (but not limited to); bacteria, viruses, heavy metals, hormones, PFAs, etc.
Model
Membrane Surface Area
Avg. Permeate Flow
Stable Rejection Rate
Minimum Rejection Rate
ULP1812-50
4.4ft² / 0.41m²
50GPD / 0.19m³/d
97.5%
96.0%
ULP1812-75
5.0ft² / 0.46m²
75GPD / 0.28m³/d
97.5%
96.0%
ULP1812-100
6.0ft² / 0.56m²
100GPD / 0.38m³/d
95.0%
93.0%
Please Note: Membrane performance is dictated by several variables, most importantly are; incoming water TDS levels, pressure, and temperature. The membrane outputs stated above are based on test conditions which are;
Concentration of Solution (NaCl) = 250ppm
Water Pressure = 60 psi / 0.41MPa / 4.14 Bar
Temperature = 25°C
The membrane elements must be stored in a cool and dry place, away from direct sunlight. Do not expose to temperatures above 45°C
