3 Stage 10" Drop In RO Replacement Water Filters for Aquarium Reverse Osmosis Units
Finerfilters 3 Stage Drop In Aquarium Reverse Osmosis Replacement Water Filters
Replacement packs contain;
1 x 10" Drop In Style Sediment Pre-Filter
1 x 10" Drop In Style CTO Carbon Block Filter
Optional: 1 x Vontron 1812/2012 Membrane (select capacity)
If you select the "No Membrane" option then you will receive only the sediment and carbon filters.
Please note: These replacement packs are for filters and membrane only.
Finerfilters 3 Stage Drop-In Aquarium Reverse Osmosis Replacement Water Filters
10" Drop-In Sediment Pre-Filter
Removes impurities in water such as sand, dirt, rust, silt, and suspended solids down to 5 Micron in order to protect the RO membrane.
10" Drop-In CTO Activated Carbon Block Filter
Removes chlorine taste and odour as well as THMs and other organic chemical compounds.
This CTO filter will not remove chloramines.
The semi-permeable membrane removes impurities in the water down to 0.0001 Micron including (but not limited to); bacteria, viruses, heavy metals, hormones, PFAs, etc.
|Model||Membrane Surface Area||Avg. Permeate Flow||Stable Rejection Rate||Minimum Rejection Rate|
|ULP1812-50||4.4ft² / 0.41m²||50GPD / 0.19m³/d||97.5%||96.0%|
|ULP1812-75||5.0ft² / 0.46m²||75GPD / 0.28m³/d||97.5%||96.0%|
|ULP1812-100||6.0ft² / 0.56m²||100GPD / 0.38m³/d||95.0%||93.0%|
Please Note: Membrane performance is dictated by several variables, most importantly are; incoming water TDS levels, pressure, and temperature. The membrane outputs stated above are based on test conditions which are;
Concentration of Solution (NaCl) = 250ppm
Water Pressure = 60 psi / 0.41MPa / 4.14 Bar
Temperature = 25°C
The membrane elements must be stored in a cool and dry place, away from direct sunlight. Do not expose to temperatures above 45°C
|Product Name||3 Stage Aquarium Reverse Osmosis 10" Drop In Replacement Water Filter Pack (PP & CTO) by Finerfilters|