4 Stage 10" Drop In Triple RO Replacement Water Filters and DI Resin for Aquarium Reverse Osmosis Systems
Finerfilters 4 Stage Triple Aquarium Reverse Osmosis with DI Resin For Drop-In Cartridge Replacement Water Filters
Removes very high levels of most impurities from the water, ideal for filtering tap water for your Aquarium.
Includes:
- 1 x Sediment Pre-Filter
- 1 x 5 Micron Carbon Block
- Bag of DI Resin
Please note: this is for RO replacement filters only. Fittings are not included. PTFE tape will be required when installing fittings.
Finerfilters 4 Stage Triple Aquarium Reverse Osmosis with DI Resin For Drop-In Cartridge Replacement Water Filters
Filter Specifications
10" Drop-In Sediment Pre-Filter
Removes impurities in water such as sand, dirt, rust, silt, and suspended solids down to 5 Micron in order to protect the RO membrane.
10" Drop-In CTO Activated Carbon Block Filter
Removes chlorine taste and odour as well as THMs and other organic chemical compounds.
This CTO filter will not remove chloramines.
DI Resin bag x 2
The deionising resin will attract any charged ions left in the water after it has passed through the Reverse Osmosis membrane, ensuring that you achieve a TDS reading of 0 required for most aquarium water top-ups. The resin we supply with this pack is Tulsion MB115 Mixed Bed DI Resin.
RO Membrane
The semi-permeable membrane removes impurities in water down to 0.0001 Micron including (but not limited to); bacteria, viruses, heavy metals, hormones, PFAs, etc.
| Model | Membrane Surface Area | Avg. Permeate Flow | Stable Rejection Rate | Minimum Rejection Rate |
| ULP1812-50 | 4.4ft² / 0.41m² | 50GPD / 0.19m³/d | 97.5% | 96.0% |
| ULP1812-75 | 5.0ft² / 0.46m² | 75GPD / 0.28m³/d | 97.5% | 96.0% |
| ULP1812-100 | 6.0ft² / 0.56m² | 100GPD / 0.38m³/d | 95.0% | 93.0% |
Please Note: Membrane performance is dictated by several variables, most importantly are; incoming water TDS levels, pressure, and temperature. The membrane outputs stated above are based on test conditions which are;
Concentration of Solution (NaCl) = 250ppm
Water Pressure = 60 psi / 0.41MPa / 4.14 Bar
Temperature = 25°C
The membrane elements must be stored in a cool and dry place, away from direct sunlight. Do not expose to temperatures above 45°C
| Product Name | 4 Stage 10" Drop In Triple RO Replacement Water Filters and 417g DI Resin for Aquarium Reverse Osmosis Systems |
|---|---|
| Brand/Manufacturer | Finerfilters |
| Model Number | FF-RO-REPL-DI4-TRPL |
| Weight (kg) | 1.200000 |
