Finerfilters Pumped 4 Stage Reverse Osmosis Unit with DI Chamber
Stage 1: Polypropylene sediment pre-filter cartridge removes sand, rust, silt and other sediments up to 5 Micron
Stage 2: Activated carbon block is formed in especially pressured, high-density blocks to gain a high adsorption rate of chlorine, other chemicals and multiparticle organic substances.
Stage 3: Reverse Osmosis Membrane
Stage 4: Refillable DI resin drop-in cartridge, used after RO process to further reduce your TDS reading
It is recommended that filters should be changed every 6 months, resin 3-6 months and membrane every 1-3 years depending on water hardness.
Finerfilters 4 Stage Pumped Reverse Osmosis Unit with DI Chamber
This 4-stage pumped unit has a DI chamber, which is supplied with high-quality DI Resin. After passing through the membrane, the filtered water is passed through the DI resin, to reduce the Total Dissolved Solids (TDS).
This includes:
1 x 4 Stage Pumped RO Unit
1 x RO Membrane
1 x 5 Micron Sediment Filter
1 x Carbon Block Filter
1 x Refillable Resin Holder Cartridge with Resin
1 x Waste Water Clamp
1 x Housing Spanner
1 x Membrane Housing Spanner
1 x Self-Piercing Feed Water Valve
1 x Length of 1/4" RO Tubing
1 x Instruction Manual
Working pressure: 2.8 - 6 bar Working temperature: 2 - 45°C.
Dimensions:
List of contaminants that reverse osmosis removes
As Reverse Osmosis can remove over 1,000 contaminants, the list below is non-exhaustive and serves to highlight removal rates of only some of the most common contaminants found in drinking water.
Approximate percentage (%) of contaminants removed by Reverse Osmosis.
Aluminium
96 - 98%
Ammonium
80 - 90%
Bacteria
99+%
Boron
50 - 70%
Bromide
90 - 95%
Cadmium
93 - 97%
Calcium
93 - 98%
Chlorine
92 - 95%
Chloride
92 - 95%
Chromate
85 - 95%
Copper
96 - 98%
Cyandie
85 - 95%
Fluoride
95 - 98%
Graphene
80 - 90%
Hardness
93 - 97%
Iron
96 - 98%
Approximate percentage (%) of contaminants removed by Reverse Osmosis (Continued.)
Product instructions.pdf