wPro UKF7003 Fridge Water Filter for Amana Maytag Refrigerator Ice & Water

The Amana Maytag UKF7003 Fridge Water Filter reduces the following health related contaminants:

Chlorine Taste and Odour, Particulates, Lead, Benzene, Cysts, Turbidity, Asbestos.

As with all built-in refrigerator water filters, the Amana Maytag UKF7003 does not remove Fluoride.

Note: The filter produces better tasting and cleaner drinking water and ice.

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

The wPro UKF7003 Fridge Water Filter operating specifications are as follows:

• Flow Rate 1.9 Litres per minute / 0.5 Gallons per minute
• Technology / Media - Carbon Block
• Operating Pressure
  Min - 207 kPa / 30 psi
  Max - 862 kPa / 125 psi
• Operating Temperature
  Min - 0.6°C / 33°F
  Max - 38°C / 100°F
• Function: Mechanical and Chemical
• Dimensions Approx.: 8 cm x 13 cm
• Capacity: 1,575 litres / 346 Gallons
• Service Life: 6 months Change filter at least every 6 months.

Installation and replacement procedure for the Amana Maytag UKF7003 Fridge Water Filter:

• Slowly turn the old cartridge 1/4 left (counter clockwise).
• Remove the old filter and discard (the water will shut off automatically).
• Remove the red cap from the new water filter.
• Push the new filter up into the filter cover.
• Turn the filter 1/4 right (clockwise) to lock it into place.
• Run water through the dispenser for 3 minutes to purge the system.
• Reset the "change filter" indicator light, if your fridge has one.
  • Beko fridges: Press the Auto Eco button for 5 seconds
  • Maytag fridges: Press and hold the Reset Filter button for 3 seconds
  • Smeg fridges Press and hold the Reset Water Filter button for 3 seconds

When to change a filter: There is a replacement indicator light for the water filter cartridge on the digital panel.

The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in flow of water.

Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.