Aqua Quality AQ-100 Water Filter Compatible with InSinkErator F-701R
This filter is fully interchangeable with the InSinkErator F-701R & F-201R Water Filter and will fit both A1 or A3 filter heads.
This filter has the same specification as the F-701R sold by InSinkErator making it much more economical solution.
About this filter;
Removes chlorine up to 98% - dramatically improves the taste of drinking water for better tasting and aromatic beverages.
Reduces particulates (sediment, rust etc.), turbidity and other unwanted tastes and odours.
Built-in Scale Inhibitor - Reduces limescale and water hardness causing minerals (calcium & magnesium) via polyphosphate media to protect your equipment.
DO NOT install where water hammer conditions may occur. If water hammer conditions do exist you MUST install a water hammer arrester. DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you MUST install a pressure limiting valve.
DO NOT install on a hot water supply.
DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F.
Protect from freezing by removing filter cartridge where temperatures drops below 40°F. Where a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.
