The store will not work correctly in the case when cookies are disabled.
IMPORTANT NOTICE TO ALL FINERFILTERS CUSTOMERS
To all of our customers - we are currently going through a site relocation commencing 01.10.24 until 11.10.24. We aim for this to have as minimal disruption as possible, however, due to the nature of the move, there may be some slight delays in relation to order dispatch and responding to customer enquiries.
Finerfilters Deluxe Undersink Drinking Water Filter Kit with 1 Micron rated Finerfilters FC02 Filter.
You are buying the whole system, which includes:
1 x Finerfilters FC02 - 1 micron carbon block filter. 1 x 3M AP2 Water Filter head. 1 x Self-piercing feed saddle valve (for 15mm mains copper pipe)* 1 x 3m length of 1/4" tubing (to connect to the filter and tap). 1x 7/16" UNS x 1/4" Push-to-Connect tap fitting. 1 x A tap of your choice (Chrome, baseball, bobble, nickel)
Simple DIY install with easy to follow instructions
This kit will deliver high-quality tasting water, on tap, as and when you require it.
**Please be aware that the Saddle Valve mains water fitting connection is only suitable for standard copper mains water pipe and is not suitable for plastic mains water pipe. If you have plastic piping then you will require a different fitting.
If you have any questions please don't hesitate to contact us on 01704 807600
The lifespan of the filter is 6 months. We also sell replacement filters for this system which can be found in the "You may also like" section at the bottom of this page.
This filter is far more effective at removing chlorine, sediment and contaminants with its 1-micron carbon block, as opposed to the standard 20-micron GAC (granular activated carbon) water filter. The kit uses a twist fit cartridge for an easy, and dry six-monthly filter change. This water filter also includes polyphosphate media which is used as a scale inhibitor "“ greatly reducing the amount of limescale in the water.
This kit is perfect for the person who is looking for an easy to manage water filter system, with inexpensive filter replacements and high-quality drinking water. It is also very compact in size, meaning it takes up very little room under the sink if this could be a potential issue.
Capacity / Usage Life 880 Gallons / 4,000 Litres or 6 Months. Whichever comes first. It is recommended to change the filter every 6 months or earlier for optimal performance and to avoid bacterial growth.
Flow Rate 1.9 Litres Per Minute / 0.5 Gallons Per Minute.
Operating Pressure Minimum: 25 psi / 1.7 bar Maximum: 120 psi / 8.2 bar
Operating Temperature Minimum: 4.4°C / 40°F Maximum: 37.7°C / 100°F
Tap Specifications
Reach Approx 120mm
Height from surface to top of tap Approx 220mm
Stem Through Surface Approx 70mm The taps have a 70mm stem and although designed to fit onto your sink, should fit through most modern-day worktop and kitchen sink tops. The hole you will be required to drill through your work-surface should be between 11mm - 16mm
Operating Pressure Min: 0.5 Bar / 7.5 psi Max: 8.5 Bar / 123 psi
Disclaimer This is a DIY installation system, however it is strongly advised that the fitter should have a general knowledge of practical plumbing, but if in any doubt please consult a plumber. Finerfilters Ltd. cannot take any responsibility for damage cause by user error.
