The store will not work correctly in the case when cookies are disabled.
IMPORTANT NOTICE TO ALL FINERFILTERS CUSTOMERS
To all of our customers - we are currently going through a site relocation commencing 01.10.24 until 07.10.24. We aim for this to have as minimal disruption as possible, however, due to the nature of the move, there may be some slight delays in relation to order dispatch and responding to customer enquiries.
Finerfilters Zip FF-586 Water Filter Compatible with ZIP 91290 for Instant Boiling Water Systems
If the Zip Hydro Tap has been switched off for a prolonged period (2 days or more) run water through a chilled water dispenser for a minimum of 5 minutes before drinking.
Replace cartridge every 6 months (5,678 litres) or earlier if a noticeable reduction in flow rate occurs; taste and odours become noticeable; scale inhibitor is exhausted.
DO NOT install where water hammer conditions may occur. If water hammer conditions do exist, you MUST install a water hammer arrester.
DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve.
DO NOT install on a hot water supply pipe, this filter is for cold water feeds only.
DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F.
If a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.
