Finerfilters FF-586 Water Filter Compatible with Zip 91290 HydroTap Boiling Water Filter
- Buy 2 for £44.99 each and save 10%
- Buy 3 for £43.32 each and save 13%
Finerfilters FF-586 Water Filter Compatible with Zip 91290 for Instant Boiling Water Systems
Please note: This product is not compatible with filter model number 93702. Please double check the model number on your filter before purchasing.
- Reduces chlorine and Limescale
- Improves taste, odour
- Filters dirt and cloudiness
- Replaces ZIP 91290/FL-ZAX3
- Replace Every 6 Months
Finerfilters Zip FF-586 Water Filter Compatible with ZIP 91290 for Instant Boiling Water Systems
If the Zip Hydro Tap has been switched off for a prolonged period (2 days or more) run water through a chilled water dispenser for a minimum of 5 minutes before drinking.
Replace cartridge every 6 months (5,678 litres) or earlier if a noticeable reduction in flow rate occurs; taste and odours become noticeable; scale inhibitor is exhausted.
DO NOT install where water hammer conditions may occur. If water hammer conditions do exist, you MUST install a water hammer arrester.
DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve.
DO NOT install on a hot water supply pipe, this filter is for cold water feeds only.
DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F.
If a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.
- Pressure: 70-875 kPa Bar (10-125psi)
- Temperature: 2°C - 38°C (35-100°F)
- Capacity: 5,678 litres (1,500 gallons)
- Flow Rate: 3L/m (0.8 US g/m)
- Nominal Micron Rating: 5
|Product Name||Finerfilters FF-586 Water Filter Compatible with Zip 91290 HydroTap Boiling Water Filter|
|Expected Lifespan||6 Months|