Free Standard UK Shipping Available On This Product The Filterlogic Insinkerator Compatible water filter is fully interchangeable with the Insinkerator F701R Water Filter & the 3M AP3-765-SC Compatible Filter.
This filter has the same specification as the one sold by Insinkerator making this a much more economical solution. This filter removes chlorine, sediment and it also has a scale inhibitor to protect your equipment.
Fits A1 & A3 Head Dramatically improves the taste of drinking water, Better tasting and aroma of beverages, Reduces impurities and temporary hardness, Removes chlorine, lead, turbidity, particulates and other unwanted tastes and odours.
The Filterlogic Insinkerator Compatible water filter is fully interchangeable with the Insinkerator water filter.
Compatible with:
p300
HC3300
HC1100
GN1100
HC2200
GN2200
GN2215
HC2215
4N1
Touch Any system using the "Neo Tank" with an A1 or A3 Head. & the 3M AP3-765-SC compatible filter. This filter has the same specification as the one sold by Insinkerator making this a much more economical solution. This filter removes chlorine, sediment and it also has a scale inhibitor to protect your equipment. This filter is built to fit your existing system at a fraction of the price.
Technical Specification:
Incoming Water Temperature: Min 4.4°C / 40°F
Maximum 37.8°c / 100°F
Incoming Water Pressure: Min 25 PSI Maximum 125 PSI
Warnings: DO NOT install where water hammer conditions may occur. If water hammer conditions do exist you MUST install a water hammer arrestor. DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you MUST install a pressure limiting valve. DO NOT install on a hot water supply. DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F. Protect from freezing by removing filter cartridge where temperatures drops below 40°F. Where a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.