The store will not work correctly in the case when cookies are disabled.
IMPORTANT NOTICE TO ALL FINERFILTERS CUSTOMERS
To all of our customers - we are currently going through a site relocation commencing 01.10.24 until 07.10.24. We aim for this to have as minimal disruption as possible, however, due to the nature of the move, there may be some slight delays in relation to order dispatch and responding to customer enquiries.
Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank
Please Note: All tanks are sold without a tank valve.
If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order
Replacement pressurised water storage tank for your Reverse Osmosis Water filter system. This tank can be connected to additional tanks to increase the storage capacity on your Reverse Osmosis system.
This tank is an air bladder tank meaning the water does not touch the metal outer shell, but rests in a butyl bladder.
There is a small air charge between the outside of the bladder and the inside of the tank. It’s the air pressure that pushes the water out of the tank when the tap is opened.
The tank is pre-charged with air but will require topping up as part of the regular maintenance of your reverse osmosis system. Air can be added using a bicycle pump or similar.
Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank
Plastic Water Storage Tank
Made of food grade reinforced Polypropylene.
Contains a food grade Butyl diaphragm/bladder which holds the water, ensuring tasteless, odourless & contaminant free water.
This tank is an air bladder tank meaning the water does not touch the metal outer shell, but rests in a Butyl bladder. There is a small air charge between the outside of the bladder and the inside of the tank. It’s this air pressure that pushes the water out of the tank when the tap is opened.
The tank is pre-charged with air but will require topping up as part of the regular maintenance of your reverse osmosis system. Air can be added using a bicycle pump or similar.
Tank:
This tank can be connected to additional tanks to increase the storage capacity on your Reverse Osmosis system. Tank uses 1/4" Female x 1/4" Pushfit Angled Shut Off Valve. Plastic tank holds 6.5 litres of water.
Working Pressure: 50 PSI
Bottom Air Charge Pressure: 5-7 PSI
Dimensions: 36cm x 25cm x 25cm
Please Note: All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order
