The store will not work correctly in the case when cookies are disabled.
IMPORTANT NOTICE TO ALL FINERFILTERS CUSTOMERS
To all of our customers - we are currently going through a site relocation commencing 01.10.24 until 11.10.24. We aim for this to have as minimal disruption as possible, however, due to the nature of the move, there may be some slight delays in relation to order dispatch and responding to customer enquiries.
The Finerfilters Whirlpool SBS002 Fridge Water Filter operating specifications are as follows:
Flow Rate - 1.9 lpm
Operating Pressure - Min 140 kPa (20 psi) / Max 827 kPa (120 psi)
Operating Temperature - Min 0.6°C / Max 38°C
Capacity - 1,514 Litres
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Change filter at least every 6 months.
Installation and replacement procedure for the Finerfilters Fridge Water Filter:
Twist the old filter a quarter-turn counterclockwise
Pull the filter straight out
Remove the reusable color-keyed knob from the end
Discard the old filter
Slide the knob onto the end of the new filter
Push the new filter into the fridge with the knob until it stops
Twist the filter a quarter-turn clockwise
Reset your "change filter" light (if your fridge has one)
When to change a filter: There is a replacement indicator light for the water filter cartridge on the digital panel. The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in flow of water.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.
