Grid List

Set Descending Direction

27 Item(s)

1/4" Fittings

  1. John Guest Fitting - CI3208U7S 1/4" Pf X 7/16 Female Universal Tap Adaptor
    £4.99 inc. VAT As low as: £3.49

    JOHN GUEST FITTING - CI3208U7S 1/4" PF X 7/16 FEMALE UNIVERSAL TAP ADAPTOR

     

    • JOHN GUEST 1/4" Drinking Water Tap Push Fit Adapter
    • Allows you to connect 1/4" water filter pipe to 7/16" UNS water tap
    • Fits most type of Water Filter Taps


    Learn More
  2. Finerfilters 1/4 to 1/4 Push Fit Shut Off Valve
    £2.50 inc. VAT As low as: £1.69

    Finerfilters 1/4 to 1/4 Push Fit Shut Off Valve

    Can be used in conjunction with various water systems as an isolating valve such as; reverse osmosis units, fridge water dispensers, under sink drinking water systems and aquatics.

    Learn More
  3. Finerfilters 3/4" BSP to 1/4" PF Connector
    £4.99 inc. VAT As low as: £2.24

    Finerfilters 3/4" BSP to 1/4" PF Connector

    Learn More
  4. Pack of 5 Finerfilters 1/4" PF Shut Off Valve
    £9.95 inc. VAT

    Finerfilters 1/4" PF Shut Off Valve (5 Pack)

    Can be used in conjunction with  various water systems as an isolating valve such as reverse osmosis units, fridge water dispensers and aquatics.

    Learn More
  5. Pack of 10 Finerfilters 1/4" PF Shut Off Valve
    £16.90 inc. VAT

    Finerfilters 1/4" PF Shut Off Valve (10 Pack)

    Can be used in conjunction with  various water systems as an isolating valve such as reverse osmosis units, fridge water dispensers and aquatics.

    Learn More
  6. Pressure Gauge for Reverse Osmosis Systems with 1/4" connection by Finerfilters
    £7.25 inc. VAT

    The PSM-1 is a high quality 0-150 psi Pressure gauge suitable for use with Reverse Osmosis (RO) units.

    This gauge comes complete with ¼” push fit fittings, allowing for easy installation into your existing Reverse Osmosis setup, provided it uses ¼” tubing.

    This pressure gauge is essential for monitoring the performance of your RO system.  All RO membranes are reliant on a satisfactory supply pressure (minimum 3 bar of pressure but preferably 4 bar).   Low water pressure is a leading cause of problems with reverse osmosis units, as low pressure can cause the unit to not work at its optimum potential.  Low pressure can lead to low rejection rates, low flow rates and higher TDS readings.  The use of a pressure gauge, when using a booster pump, is also recommended in order to ensure the pressure is within the optimum range.

    This pressure gauge will allow you to monitor your membrane inlet pressure and provide a rough guide to when your pre-filters require replacing.

    Please note – the pressure gauge is best effective installed away from any water pumps i.e on an RO unit after the pre-filters. Otherwise the pulse from the pump will cause the gauge to continually jump and not give an accurate reading.

    Learn More
  7. DMFit 15mm PF x 1/4" PF (AUC15M04)
    £8.99 inc. VAT As low as: £4.49

    DMFit Female adapter manufactured from a black acetal copolymer, which is a safe and non-toxic material suitable for potable liquids and applications involving foodstuff.

    Fitting features 15mm push fit x 1/4” PF connections

    Learn More
  8. DMFit 1/4" Two Way Divider 'Y' Piece Equal Connector (ATWD0404)
    £2.99 inc. VAT As low as: £1.59

    DMFit 1/4" Two Way Divider 'Y' Piece Equal Connector (ATWD0404)

    1/4" push fit two way divider connector can be used for drinking water, reverse osmosis and other appilcations.

    Learn More
  9. Finerfilters 1/4" Male x 1/4" Push Fit Plastic Elbow Fittings (Pack of 2 Fittings)
    £2.99 inc. VAT As low as: £0.79

    Finerfilters 1/4" Male x 1/4" Push Fit Plastic Elbow Fittings x 2

     This type of fitting is used as a connection for connecting 1/4" pipe to reverse osmosis housings. It will also fit any other application using the correct sized fittings, such as inline filters, water filter housings, UV sterilisers and drinks dispensers. These fittings are made from FDA approved polypropylene, which means they are safe to use in food and drinks processing as the materials used don’t leak contaminants into the water.

    Learn More
  10. Finerfilters 1/4" Male x 1/4" Push Fit Straight Fittings x 2
    £2.19 inc. VAT As low as: £0.59

    Finerfilters 1/4" Male x 1/4" Push Fit Straight Fittings x 2

     This type of fitting is used as a connection for connecting 1/4" pipe to reverse osmosis housings. It will also fit any other application using the correct sized fittings, such as inline filters, water filter housings, UV sterilisers and drinks dispensers. These fittings are made from FDA approved polypropylene, which means they are safe to use in food and drinks processing as the materials used don’t leak contaminants into the water.

    Learn More
  11. 3M AP2 Head
    £19.99 inc. VAT As low as: £16.99

    Compatible with:

    3M AP2-C401-G
    3M AP2-C401-SG
    3M AP2-C405-G
    3M AP2-C405-SG
    Finerfilters FC02



    Learn More
  12. John Guest PI010801S Straight Adaptor 1/4" Push Fit x 1/8" BSPT Male Thread
    £3.49 inc. VAT As low as: £1.99

    John Guest PI010801S Straight Adaptor 1/4" Push Fit x 1/8" BSPT Male Thread

    1/4" Push Fit / Speed Fit connection for LLDPE Tubing

    1/8" BSPT Threaded Adapter

    Gray acetal copolymer construction with nitrile O-rings.

    WRAS approved materials.

    NSF Certified 51 & 62.

    Suitable for water, air, inert gases and pneumatic applications or vacuum.

    Learn More
  13. John Guest straight Reducing connector 1/4" Push Fit (quick connect) x 5/16" PF
    £3.89 inc. VAT

    Genuine John Guest PI201008S John Guest Speed-Fit push fit connection Suitable for use with 1/4 inch (6mm) water pipe & is commonly used in Reverse Osmosis Suitable for use in all potable cold water appliances using 1/4" (6mm) pipe

    Learn More
  14. John Guest PI0308S Equal Elbow 1/4 Push Fit Pipe Connector - Speed Fit
    £5.99 inc. VAT
    John Guest PI0308S Equal Elbow 1/4 Push Fit Pipe Connector - Speed Fit The connector/joiner will extend your ¼” water filter pipe with an easy push fit connection. Also Suitable for foodstuffs, potable liquids, air and inert gases. Mainly used for extending water pipe for fridges with water filters. No need to change your water pipe for a longer piece, just extend it or change direction with this fitting. A general knowledge of plumbing skills is all you need to fit this product. However, if you are at all unsure then please consult a plumber. PRODUCT NO. PI0308S Learn More
  15. John Guest ASV3 - Angle Stop Valve 1/4" Water Feed Connector 15mm Push Fit
    £15.99 inc. VAT As low as: £12.99

    JOHN GUEST ASV3 - ANGLE STOP VALVE 1/4" WATER FEED CONNECTOR 15mm PUSH FIT 

    This is a genuine John Guest ASV3 adapter and meets NSF (National Science Foundation) standards and is WRAS Approved fitting.

    This angle stop valve is used to obtain a 1/4" water feed from standard 15mm mains pipe.

    The valve connects inline with 15mm pipework using John Guest Speed Fittings, and tees off a 1/4" connection (to connect to water coolers, fridges, under sink filters, etc...).

    The valve has a built in one way check valve and a On / Off control for the 1/4" outlet for ease of use

    Learn More
  16. John Guest Fitting CI320816Fs 3/4" BSP Female x 1/4" Push Fit
    £6.99 inc. VAT As low as: £3.29

    JOHN GUEST FITTING CI320816FS 3/4 BSP FEMALE X 1/4 PUSH FIT

    • John Guest Genuine product
    • Certified by NSF
    • Strong and reliable product
    • Quick delivery


    Learn More
  17. John Guest Fitting CI320814S - 1/2" BSP Female X 1/4" Push Fit
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING CI320814S - 1/2" BSP FEMALE x 1/4" PUSH FIT

     

    • John Guest 1/2" (15mm) BSP Female to 1/4" Push fitting Tap Adapter
    • Push fittings securely connects 1/4" (6.35mm) tubing to the adapter
    • Component is to NSF Standard & WRAS Approved
    • High Quality for a reliable leak free connection
    • Screws onto 1/2" BSP fittings to provide a 1/4" push fitting


    Learn More
  18. John Guest PI0208S 1/4" Push Fit Tee Fitting
  19. John Guest - PI0408S 1/4" Push Fit Straight x 1/4" Push Fit Straight
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING - PI0408S 1/4" PUSH FIT STRAIGHT x 1/4" PUSH FIT STRAIGHT

    GENUINE JOHN GUEST FITTING

    Learn More
  20. John Guest Fitting - PI061208S - 3/8" Stem x 1/4" Push Fit
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING - PI061208S - 3/8" STEM X 1/4" PUSH FIT

    GENUINE JOHN GUEST FITTING

    CAN BE USED WITH DOULTON HOUSINGS TO REDUCE TO 1/4" PUSH FIT

    Learn More
  21. John Guest Fitting PI050801S 1/8" BSPT Male x 1/4" Push Fit Stem Adaptor
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING 1/8" BSPT MALE x 1/4" PUSH FIT STEM ADAPTOR

    WRAS APPROVED PRODUCT

    Learn More
  22. John Guest Fitting PI201208S 3/8" Push Fit Straight x 1/4" Push Fit Straight
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING PI201208S 3/8" PUSH FIT STRAIGHT x 1/4" PUSH FIT STRAIGHT

    GENUINE JOHN GUEST PART

    Learn More
  23. John Guest Fitting PI211208S 3/8" Push Fit Elbow x 1/4" Push Fit Elbow
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING PI211208S 3/8" PUSH FIT ELBOW x 1/4" PUSH FIT ELBOW

    GENUINE JOHN GUEST PART

    Learn More
  24. John Guest Fitting PI221208S 1/4" Push Fit x 3/8" Stem Elbow
    £6.99 inc. VAT As low as: £4.99

    JOHN GUEST FITTING PI221208S 1/4" PUSH FIT x 3/8" STEM ELBOW

    GENUINE JOHN GUEST PART

    Learn More
  25. John Guest PPSV040808W Shut Off Valve 1/4" Push Fit x 1/4" Push Fit
    £9.99 inc. VAT As low as: £6.99

    JOHN GUEST SHUT OFF VALVE 1/4" PUSH FIT x 1/4" PUSH FIT

    • Genuine John Guest Shut Off Valve 1/4" Push Fit
    • WRAS Approved Product
    • Used To Turn Water Supply Off & On


    Learn More
  26. 15mm Pipe To 1/4" Push Fit Fridge Water Filter Pipe Adapter
    £11.49 inc. VAT As low as: £9.49

    15mm PIPE TO 1/4" FRIDGE WATER FILTER PIPE ADAPTER-PUSHFIT

    • This is a John Guest 3/4" BSP X 15MM PUSHFIT STRAIGHT ADAPTER sold with a John Guest 3/4"x FEMALE - 1/4"WATER PIPE REDUCER. 
    • Are you just having your new fridge fitted? and you are wondering how you can take your 15mm water supply down to the 1/4 inch waterpipe size! Then wonder no more! .
    Learn More
  27. John Guest PI450822S Female Adaptor 1/4" Push Fit x 1/4" NPTF Female Thread
    £3.99 inc. VAT As low as: £2.49

    John Guest PI450822S Female Adaptor 1/4" Push Fit x 1/4" NPTF Female Thread

    1/4" Push Fit / Speed Fit connection for LLDPE Tubing

    1/4" NPTF Female Thread Adapter

    Gray acetal copolymer construction.

    WRAS approved materials.

    NSF Certified 51 & 61.

    Suitable for use with potable liquids.

    Learn More

Grid List

Set Descending Direction

27 Item(s)

Latest reviews for 1/4" Fittings

5

Average Rating :

Total Reviews:10


John Guest Fitting CI320814S - 1/2" BSP Female X 1/4" Push Fit

First Class

Very helpful staff. Prompt delivery of exact item.

Finerfilters 1/4" Male x 1/4" Push Fit Straight Fittings x 2

Easy Peasy

I had a minor water leak after replacing the filter cartridge ,on one of the push fit connectors. I ordered a couple (they come in Two's) they arrived quickly by post and the leak was sorted in 10 minutes...Plus, I couldn't believe how inexpensive they were....

15mm Pipe To 1/4" Push Fit Fridge Water Filter Pipe Adapter

Works Just Fine

Nice, easy push fit onto the mains water pipe and easy to insert the water pipe going into the fridge/freezer. Quite expensive for what it is but it’s the only single unit that I’ve seen to make this connection.

John Guest straight Reducing connector 1/4" Push Fit (quick connect) x 5/16" PF

Conversion Coupler

The 5/6 to 1/4 coupler felt more of a positive fit than the original very pleased

John Guest Fitting PI201208S 3/8" Push Fit Straight x 1/4" Push Fit Straight

Excellent Service

We needed this part urgently and it was no trouble for Finerfilters to arrange next day delivery so that our fitter could complete our installation.

John Guest - PI0408S 1/4" Push Fit Straight x 1/4" Push Fit Straight

John Guest Fittings

Excellent service from start to finish, product good, no problems.

John Guest Fitting PI201208S 3/8" Push Fit Straight x 1/4" Push Fit Straight

Always Pleased With The Water Gem Filter.

I have been using the Water Gem system for approx 12 years and this is the first time I have had to change to the push fit straight connection.(The system was supplied when new with the L shaped connection.) It works perfectly but if I had the choice I would still use the L shaped push fit as I think the straight fit puts added strain on the plastic tubing that feeds the filter.

John Guest PI0308S Equal Elbow 1/4 Push Fit Pipe Connector - Speed Fit

Fabulous

The service was outstanding and the staff were very knowledgeable, I haven't yet used the product but I am sure that it will be as good a quality as the water filter I recently purchased. I would not hesitate to recommend both the company and products to anyone

John Guest Fitting - PI061208S - 3/8" Stem x 1/4" Push Fit

Easy Solution

I purchased this when I changed from a Franke to a Doulton filter housing. It makes installation very easy and straightforward. Just a simple push fit with no leaks.

John Guest PI0308S Equal Elbow 1/4 Push Fit Pipe Connector - Speed Fit

Perfect Fit

Excellent quality connector which saved me having to renew a whole pipe. As always the service from Finefilters was top notch.