Grid List

Set Descending Direction

3 Item(s)

Tanks

  1. Finerfilters Stainless Steel Reverse Osmosis 6.5 Litre / 3.2 Gal Pressurised Storage Tank
    £31.99 inc. VAT

    Finerfilters Reverse Osmosis 6.5 Litre / 3.2 Gal Pressurised Storage Tank

    Tank uses ¼” valves.

    Stainless steel, 3 gallons (11.35 litres).

    Operating pressure 6 bar (80-90 psi)

    Weight is 3.4kg

    Dimensions: 280 x 280 x 375

    Please Note:  All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order.

    Learn More
  2. Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank
    £16.99 inc. VAT

    Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank

     

    Please Note:  All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order

    Replacement pressurised water storage tank for your Reverse Osmosis Water filter system.  This tank can be connected to additional tanks to increase the storage capacity on your Reverse Osmosis system.

    This tank is an air bladder tank meaning the water does not touch the metal outer shell, but rests in a butyl bladder.

    There is a small air charge between the outside of the bladder and the inside of the tank.  It’s the air pressure that pushes the water out of the tank when the tap is opened.

    The tank is pre-charged with air but will require topping up as part of the regular maintenance of your reverse osmosis system. Air can be added using a bicycle pump or similar.

    Learn More
  3. Finerfilters 10 Litre Pressurised Reverse Osmosis Storage Tank
    £29.99 inc. VAT

    Finerfilters 10 Litre Pressurised Reverse Osmosis Water Storage Tank

    This tank is designed to be used with a Reverse Osmosis system, with a holding capacity of 10 litres.

    The tank also contains a rubber bladder, which is kept at around 10PSI to allow the water to be drawn.

    Water is stored in the bladder, which is made of a material called butyl. When there is a demand for water, the water is pushed out of the tank's bladder by air pressure. Once the tank has been depleted to a certain level, and pressure is released from the tank, the auto shut off valve on the RO system senses this and starts to produce water to refill the tank.

    The water you're going to drink doesn't touch the material that the tank is made from – Except for the spout, which is food grade polypropylene on most modern tanks. The water contacts only the butyl bladder. Butyl has been used for years for RO tanks and well tanks and is regarded as inert.

     

    Dimensions:

    Weight: 2600g/2.6kg

    Please Note:  All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order

    Learn More

Grid List

Set Descending Direction

3 Item(s)