Independently developed by Vontron - the RO element ULP-3012-400 is a 12" x 3" Domestic Reverse Osmosis Membrane and is designed for low-salinity water resources such as tap water, well water, etc.
Working under extra low pressure, it can be used in water purifying devices and applications such as residences, hospitals or laboratories.
It will provide up to 400 US Gallons per day (GPD) / 63.09 Litres per hour (1.51 cubic meters) per day at optimum output.
Vontron ULP3012-400GPD TFC Membrane For Reverse Osmosis Systems
Reverse Osmosis membrane elements contain a preserving solution and should be flushed for 1 hour and the resultant permeate solution discarded before normal operation can be resumed. The elements must be kept moist at all times after initial wetting.
Elements should be immersed in a protective solution during storage, shipping or system shutdowns to prevent biological growth and frost damage.
Technical Information
Membrane Type: Polyamide Thin-Film Composite
Dimensions:
Length: 12" / 298mm
Diameter: 3" / 73mm
Maximum Operating Pressure: 290psi (20bar)
Maximum Feed Rate: 2.0gpm (7.6 lpm)
Maximum Operating Temperature: 113°F (45°C)
Free Chlorine Tolerance: <0.1ppm
Average Permeate: 400GPD
Stable Rejection: 95%
Min. Rejection: 94%
Testing Conditions
Testing Pressure: 100 psi (0.69MPa)
Temp. of Testing Solution: 25°C
Concentration of Test Solution: (NaCl): 500ppm
pH of Testing Solution: 6.5 - 8.5
Recovery of Single Element: 15%
Please note:
Permeate of single elements elements may vary within +/-20%.
Free chlorine can be damaging to the membrane leaves, please ensure that steps are taken to remove as much as possible such as activated carbon pre-filters prior to allowing water to pass through the membrane.
Vontron ULP3012-400 RO Membrane Element.pdf