Zip 91290 HydroTap G4 ZT402 0.2 Micron Genuine GlobalPlus™ Water Filter
- Buy 2 for £103.99 each and save 1%
- Buy 3 for £102.89 each and save 2%
Zip GlobalPlus™ G4 HydroTap ZT402 91290 0.2 Micron Genuine Water Filter
For drinking water, boiling water and chilled water applications.
The Zip 91290 water filter reduces:
- Bacterial growth.
- Chlorine taste and odour.
- Sediment and particulates down to 0.2 micron (nominal).
- Cryptosporidium parvum oocyst & Giardia.
Independently tested and certified to NSF 42 and 53 standards.
Also meets the standards of; AS/NZS 3497, WM-035000, AS/NZS 4348
DO NOT install where water hammer conditions may occur. If water hammer conditions do exist you MUST install a water hammer arrester.
DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 100 psi (700 kPa), you MUST install a pressure limiting valve.
DO NOT install on a hot water supply.
DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F.
Protect from freezing by removing filter cartridge where temperatures drops below 40°F.
Where a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.
Minimum: 172 kPa / 1.72 bar
Maximum: 862 kPa / 8.62 bar
Must be installed with a pressure reducing valve if pressure exceeds 700kPa
Minimum: 4.4°C / 39.92°F
Maximum: 38°C / 100.4°F
Do not install where exposed to direct sunlight or temperatures are less than 4°C or greater than 40°C.
Do not install on hot water supply lines.
Minimum: 0.9 Litres per minute
Maximum: 1.9 Litres per minute
6,435 litres @ 1.9lpm
The disposable filter cartridge MUST be replaced every 12 months, at the rated capacity or sooner if a noticeable reduction in flow rate occurs.
|Product Name||Zip 91290 HydroTap G4 ZT402 0.2 Micron Genuine GlobalPlus™ Water Filter|
|Expected Lifespan||12 Months|
|Micron Rating||0.2 Micron (Nominal)|