Finerfilters 4 Stage Reverse Osmosis Unit with DI Chamber
Stage 1: Polypropylene sediment pre-filter cartridge removes sand, rust, silt and other sediments up to 5 Micron
Stage 2: Activated carbon block the carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances.
Stage 3: Reverse Osmosis Membrane
Stage 4: Refillable DI resin inline cartridge, used after RO process to further reduce your TDS reading
It is recommended that filters should be changed every 6 months, and membrane every 1-3 years depending on water hardness.
Finerfilters 4 Stage Reverse Osmosis Unit with DI Chamber (100 GPD)
This 4-stage unit has a DI chamber, which is supplied with high quality DI Resin. After passing through the membrane, the filtered water is passed through the DI resin, to reduce the Total Dissolved Solids (TDS).
This includes:
1 x 4 Stage RO Unit
1 x RO Membrane (100 GPD)
1 x 5 Micron Sediment Filter
1 x Carbon Block Filter
1 x Refillable Resin Holder Cartridge with Resin
1 x Waste Water Clamp
1 x Housing Spanner
1 x Membrane Housing Spanner
1 x Self-Piercing Feed Water Valve
1 x Length of 1/4" RO Tubing
1 x Instruction Manual
Working pressure: 2.8 - 6 bar Working temperature: 2- 45°C.
Dimensions: H 44cm x W 35cm x D 13cm
List of contaminants that reverse osmosis removes
As Reverse Osmosis can remove over 1,000 contaminants, the list below is non-exhaustive and serves to highlight removal rates of only some of the most common contaminants found in drinking water.
Approximate percentage (%) of contaminants removed by Reverse Osmosis.
Aluminium
96 - 98%
Ammonium
80 - 90%
Bacteria
99+%
Boron
50 - 70%
Bromide
90 - 95%
Cadmium
93 - 97%
Calcium
93 - 98%
Chlorine
92 - 95%
Chloride
92 - 95%
Chromate
85 - 95%
Copper
96 - 98%
Cyandie
85 - 95%
Fluoride
95 - 98%
Graphene
80 - 90%
Hardness
93 - 97%
Iron
96 - 98%
Approximate percentage (%) of contaminants removed by Reverse Osmosis (Continued.)
Drop In RO System Installation Instructions.pdf