John Guest Fridge Water Filter Fitting Kit - Pushfit

FINERFILTERS DO IT YOURSELF: Basic fridge water connection-fitting kit
If you are starting from scratch or recently moved and need to re-plumb your water supply to your fridge this will be what you need. The Kit consists of.

1 x 15mm push-fit copper pipe adaptor with a 1/4" water pipe reducer fitting, to make your initial connection to the water supply and to connect the 1/4" water pipe.

5 metres of 1/4" John Guest water pipe, plenty to allow you to pull your fridge out, without putting strain on a short pipe.

1 x 1/4" x 1/4" shut-off valve, this will enable you to service your appliance, easily shutting off the 1/4" supply. 1 x 1/4" straight connector to join the water pipe that comes from the back of your fridge to your new water pipe.

THE 15MM PUSH-FIT CONNECTOR SOLD WITH THIS SYSTEM HAS BEEN TESTED ON, 15mm COPPER, 15MM SPEED-FIT AND 15MM HEP20.

A general knowledge of plumbing skills is all you need to fit this product, but if you are unsure, please consult a plumber.