FilterLogic VFL-401 Water Filter Cartridge Compatible with InSinkErator F701R for HC1100, HC3300 Systems

The Filterlogic Insinkerator Compatible water filter is fully interchangeable with the Insinkerator water filter.

Compatible with:

• p300
• HC3300
• HC1100
• GN1100
• HC2200
• GN2200
• GN2215
• HC2215
• 4N1

Touch Any system using the "Neo Tank" with an A1 or A3 Head. & the 3M AP3-765-SC compatible filter. This filter has the same specification as the one sold by Insinkerator making this a much more economical solution. This filter removes chlorine, sediment and it also has a scale inhibitor to protect your equipment. This filter is built to fit your existing system at a fraction of the price.

Technical Specification:

• Incoming Water Temperature: Min 4.4°C / 40°F
• Maximum 37.8°c / 100°F
• Incoming Water Pressure: Min 25 PSI Maximum 125 PSI
• Filter Dimensions: Height - 265mm Width - 85mm Depth - 85mm
• Capacity: 7,600 Ltr.
• Cartridge Lifespan: 6 Months

Warnings: DO NOT install where water hammer conditions may occur. If water hammer conditions do exist you MUST install a water hammer arrestor. DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you MUST install a pressure limiting valve. DO NOT install on a hot water supply. DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F. Protect from freezing by removing filter cartridge where temperatures drops below 40°F. Where a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.