FF-94 Compatible with Whirlpool SBS002, S20BRS, 4396508 Fridge Water Filter

FINERFILTERS WHIRLPOOL SBS002 FRIDGE WATER FILTER

The Finerfilters Whirlpool SBS002 Fridge Water Filter operating specifications are as follows:

• Flow Rate - 1.9 lpm
• Operating Pressure - Min 140 kPa (20 psi) / Max 827 kPa (120 psi)
• Operating Temperature - Min 0.6°C / Max 38°C
• Capacity - 1,514 Litres

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Change filter at least every 6 months.

Installation and replacement procedure for the Finerfilters Fridge Water Filter:

• Twist the old filter a quarter-turn counterclockwise
• Pull the filter straight out
• Remove the reusable color-keyed knob from the end
• Discard the old filter
• Slide the knob onto the end of the new filter
• Push the new filter into the fridge with the knob until it stops
• Twist the filter a quarter-turn clockwise
• Reset your "change filter" light (if your fridge has one)

When to change a filter: There is a replacement indicator light for the water filter cartridge on the digital panel. The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in flow of water.

Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.